Remote Digital Input Module
TOP Deals For
Remote Digital Input Module at Shopleadly - Last Checked Shopping Results - June 25, 2019
For every Remote Digital Input Module search, Shopleadly shows the most relevant products from top stores right on the first page of results, and delivers a visually compelling, efficient and complete online shopping experience from the browser, smartphone or tablet.
Compare prices and explore Remote Digital Input Module at all the leading online stores in United States. Find the cheapest & discount price.
SainSmart 5V 2A 8 Channel Solid State Relay Module High Level Trigger Black for Arduino Uno Duemilanove MEGA2560 MEGA1280 ARM DSP
Description: SainSmart 5V solid state relays per channel 250V 2A, output with resistive fuse 250V 2A Features: •8 channel 2 AMP Solid State Relay board Good for lighting- holiday displays etc •The input control signal voltage: (0-0.5V LOW solid state relay OFF) (2.5-20V high solid state relays ON) •Rated output load: 2A at 100 to 240VAC (50/60Hz) •Load voltage range: 75 to 264VAC (50/60Hz) •Load current: 0. 1 to 2 AMP •Power supply: 5VDC / 160mA (all channel ON) •Load type: General purpose •Isolation: Phototriac •Zero cross: Yes Module interface: Input section: •DC+: positive power supply (by relay voltage power supply) •DC-: connect power negative •CH1: 1 relay module signal to trigger the end (high level trigger effective) •CH2: 2-channel relay module signal to trigger the end (high level trigger effective) •CH3: 3 relay module signal to trigger the end (high level trigger effective) •CH4: 4-channel relay module signal to trigger the end (high level trigger effective) •CH5: 5 relay module signal to trigger the end (high level trigger effective) •CH6: 6-channel relay module signal to trigger the end (high level trigger effective) •C...
Brand: SainSmart ASIN: B00ZZW7MI6
HiLetgo® Multi-Function Shield ProtoShield Multi-functional Expansion Board Sensor Shield Module witn Four Digital Display for
Features:*The buzzer sound can be used for Sound experiments. (can alarm, pronunciation, etc.)*Bluetooth, wireless interface, voice module, voice recognition module, you can make wireless communication experiment.*Servo interface, easy to drive the servo.*Infrared detection interface to facilitate docking and infrared, to achieve human traffic statistics.*DS18B20 temperature sensor interface, you can do temperature measurement experiment. (Not including DS18B20).*LM35 temperature sensor interface, temperature measurement can be done experiment (not including LM35.*Integrated infrared receiver, can fit any infrared remote control experiment (not including the integrated receiver). Instructions for use:1. Expansion board directly connected with LD3320 non-specific voice recognition module, you can achieve voice control.2. Expansion board directly connected with the Bluetooth wireless serial port module, you can control the light mobile phone control, smart car movement.3. Extension board directly connected with the APC220 wireless serial port module, you can achieve long-distance data transfer.4. Expansion board docking directly with the infrared photoelectric sensor, you can achieve traffic statistics, intelligent car obstacle avoidance and other functions. 5. Expansion board dire...
ICP DAS USA ET-2254P Ethernet I/O Module with 16-channel Universal Digital Input and Output, Modbus TCP. Can drive 400 mA
The ET-2254P provides 16-channel Universal DIO. Each I/O port can be configured as DI or DO port. The ET-2254 provides Digital Output channel can drive 100 mA load, while the ET-2254P provides Digital Output channel can drive 400 mA load. There are configurable power-on and safe values for Digital Output. With 2 Ethernet ports, the ET-2254P allows daisy chain connection which enables flexibility in locating devices; easy installation and lower infrastructure costs. It features 8 kV ESD protection, 4 kV EFT protection, 3 kV surge and 3750 VDC I/O isolation to enhance noise protection capabilities in industrial environments.
Brand: ICP DAS ASIN: B01IE2KF4G
ICP DAS M-7026 Modbus RTU Data Acquisition Module with Analog Input, Digital Input and Digital
The M-7026 is a Modbus RTU based multifunction module with 6 analog inputs, 2 analog outputs, 3 digital inputs, and 3 digital outputs . It provides a programmable input range on all analog inputs (+/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA or 0 ~ +20 mA). The analog outputs are 12-bit at +/-5 V, +/-10 V, 0 ~ +20 mA or +4 ~ +20 mA. All digital outputs can be set as alarm outputs. Each analog input can be configured for an individual range and provides a high overvoltage protection of 240 Vrms. Voltage and current inputs/outputs are jumper selectable. Learn more: http://www.icpdas-usa.com/m_7026.html?r=amazon
Brand: ICP DAS ASIN: B014K1ZLUS
Anmbest DC 3-5V PLL DSP Digital FM Stereo Radio Wireless Village Campus Broadcast Receiver Module with LCD
Technical Specifications: Nominal Output Power: 500mW (driving earphone);3Wx2 (driving loudspeaker) Frequency Response Range:50Hz-18KHz Receiving Frequency Range:87.0MHz-108.0MHz (campus broadcast power off);76.0MHz-108.0MHz (campus broadcast power on) Equivalent Noise: greater than or equal to 30dB Power Supply Voltage:3.0V-5.0V Power Supply Current:1000mA (max volume);60mA (minimum volume) Sound Track; stereo Instructions: 1.Mute/Unmute:short press the VOL potentiometer to turn on/off the mute. 2.Auto-squelch:Long press the FRE potentiometer to turn on/off the auto-squelch and the LCD will display the corresponding on/off. 3. Campus Broadcast On/Off: under power off status, long press the VOL potentiometer and power on the modulem the LCD display C1 means open the campus broadcast and display C0 means close the campus broadcast. 4.Under power off status, long press the FRE potentiometer and power on the module, LCD display BI means the backight keep light up; display B0 means only light up 20 seconds(default B0) Terminal Instructions: 1. The USB terminal serves as an additional external port for connecting a computer as an external USB audio device. 2. The 3Wx2 amplifier is integrated on this module board and can directly drive two 3W speakers; The SP_L port is con...
Brand: Anmbest ASIN: B07DCX8L6K
Opto 22 SNAP-AOA-23 - SNAP Current Loop Analog Output Module, 2-Channel, 4-20 mA Input 5 Volts DC (+/-0.15) at 150 mA, Output Range , 16 mA
The SNAP-AOA-23 provides two channels of analog current output at a nominal range of 4-20 mA. An external loop power source is required for the current loops. Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices. The module is factory calibrated. Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-Bradley Logix PLC system, such as ControlLogix, MicroLogix, or CompactLogix.Underwriters Laboratory, Factory Mutual, Canadian Factory Mutual, IEC 950: 1991-09, 89/336/EEC, 2002/95/EC, Defense Federal Acquisition Regulation Supplement
Brand: Opto 22 ASIN: B0058V03DU UPC: 013227067749
Wifi Relay Board 8 Outputs 3 Inputs Wifi Remote Control Relay for Support Andriod Iphone Windows and Mac APP USR-WIFIIO-83 with 12V 1A
Wifi Relay Board 8 Outputs 3 Inputs Support Andriod Iphone Windows And MAC APP USR-WIFIIO-83 w/ 12V 1A Adapter We have US-plug and EU-plug adapters in our inventory.Please note that we will ship the adapter according to your country if you do not leave us any message.Thanks. Specification: Module:USR-WIFIIO-83 Dimension: (L×W×H) 104.5*83*28.7mm (antenna, external terminals and fixed edge on both sides not included) Input voltage: DC 12V Number of Ports: 8 outputs, 3 inputs, No 1 and 10 in the output is public port Standby power consumption: 3W, Max 6W Input port work: Passive switch Port maximum current/voltage output: AC 250V/10A Working temperature: -25~75 degreesC Storage temperature: -40~85 degreesC Storage humidity: 5%~95%RH. Features: Control switches remotely! New version, 8 channel output, 3 channel input Single channel max working current up tp 10A Supply app based on Android Iphone Windows and MAC Support timing function Manual: http://www.lillyelectronics.com/download/USR-WIFIIO-83-EN-V1.3.pdf http://www.lillyelectronics.com/download/USR-WIFIIO-83-usr-iot.apk http://www.lillyelectronics.com/download/USR-WIFIIO-83-Smart-Iot-V1.0-Beta.rar http://www.lillyelectronics.com/download/USR-WIFIIO-83-Smart-IOT-V1.0-Beta.dmg Package: USR-WIFIIO-83 * 1 12V power adapter * 1 A...
Brand: Q-BAIHE ASIN: B01B7GQ8NS
VersaLog VL-WF-TC WiFi Thermocouple Data
The VL-WF-TC WiFi Thermocouple Data Logger is an 8-channel, battery powered, standalone and WIFI-enabled thermocouple data logger. The logger records eight thermocouple inputs and saves data in 8MB memory.Its aluminum enclosure makes it excellent in the harshest industrial environment.Embedded WIFI module allows remote data monitoring and downloading.16-bit ADC makes it well suited for science and laboratory applications where precise and accurate measurements are critical.Simply power the logger in WIFI covered area and access it from your computer for configuration, downloading, graph viewing and more…
Color: Black Brand: VersaLog ASIN: B07DM9GTM7 UPC: 769055421634
ICP DAS M-7054P Din-rail Mountable Remote I/O Module with 16-channel Universal Digital
The M-7054(P) provides 16 channels for universal Digital Input/Output, which can be selected via wire connections. The Digital Input channels are source type and can be used as 16-bit counters, while the Digital Output channels are sink type with short circuit protection and options for configuring power-on and safe Digital Output values. The M-7054(P) also provides ¡À8 kV ESD, ¡À4 kV EFT and ¡À3 kV surge protection and 3750 VDC intra-module isolation to enhance noise protection capabilities in industrial environments. Learn more: http://www.icpdas-usa.com/m_7054p.html?r=amazon
Brand: ICP DAS ASIN: B01IU73AQ0